SG Standard

Like the landmark Les Paul before it, the SG Standard shattered all perceptions of what a guitar could be when it was first introduced in 1961. Today, it stands as one of the most popular and best-selling of all Gibson guitars. Its distinct twin cutaways, pointed horns, and beveled edges have made it one of the most inspired and iconic designs in the history of guitar-making. And not only is it one of the most eye-catching guitar designs, it is also one of the most functional and effective. The streamlined body is a solid, lightweight piece of mahogany, with exceptional resonance to ensure superior tone and greater sustain. Its traditional, 22-fret mahogany neck with rosewood fingerboard and rounded profile has long been championed as the fastest guitar neck in the world, and the twin cutaways offer easier access to the higher frets. In the neck position, Gibson’s 490R Alnico II pickup provides a warm, full sound with a slight upper mid-range boost. At the bridge, Gibson’s 498T Alnico V is wound hotter, with enhanced mid-range and high frequencies. Both pickups offer classic, singing humbucker tone, and both are carefully hand-wound at Gibson USA in Nashville, Tennessee. The SG Standard is available in Heritage Cherry, Ebony, or Natural Burst finishes, with chrome hardware.

Finishes

     

Hot Points

The Gibson Logo

The most innovative and revolutionary stringed instruments of all time have carried the name Gibson—the Les Paul, the ES-335, the Explorer, the Flying V, the SG. The list goes on and on. There is no mistaking the classic, hand-crafted mother of pearl logo, inlayed into a pressed fiber-head veneer that is then glued to the face of the mahogany headstock. A thin coat of lacquer finishes the process. It is the most recognizable logo in all of music, representing more than a century of originality and excellence. There is simply no equal.

Angled Headstock

The angled headstock is another example of Gibson’s industry-changing way of thinking. Every Gibson headstock is carved out of the same piece of mahogany as the neck then fitted with Gibson’s traditional wing blocks. It is not a “glued-on” headstock, and the process takes craftsmanship, time, and effort. But the rewards are worth the effort. The headstock is carefully angled at 17 degrees, which increases pressure on the strings and helps them stay in the nut slots. An increase in string pressure also means there is no loss of string vibration between the nut and the tuners, which equals better sustain.

Adjustable Truss Rod

The adjustable truss rod is a Gibson innovation that revolutionized the guitar. Before this ground-breaking discovery in the early 1920s, the truss rod was used only to strengthen and stabilize the neck. By making it adjustable, the truss rod now allows a guitar to be set up using a variety of string gauges, as well as string heights. This easily accommodates any style of playing, and allows a limitless range of set-up options. And by placing it at the base of the headstock, the adjustable nut is easily accessible, even while the strings are still on the guitar.

’50s Rounded Neck Profile

No guitar neck profiles are more distinguishable than the neck profiles employed on the Gibson models of today. The more traditional ’50s neck profile—found on the SG Standard—is the thicker, rounder, more time-honored profile, emulating the neck shapes of the iconic late ’50s Gibson models. The neck is machined in Gibson’s rough mill using wood shapers to make the initial cuts. But once the fingerboard gets glued on, the rest—including the final sanding—is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.

22-Fret Rosewood Fingerboard

Rosewood has always graced the fingerboards of the world’s finest stringed instruments, including many of today’s Gibsons. The fingerboards on Gibson SGs are constructed from the highest grade rosewood on the planet. The rosewood is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the factories to be fitted onto the neck of the SG Standard. The resilience of this dense and durable wood makes these fingerboards extremely balanced and stable, and gives each chord and note unparalleled clarity and bite. The 12-inch radius of the fingerboard provides smooth note bending capabilities and eliminates “dead” or “choked out” notes, common occurrences on fingerboards with lesser radiuses.

Nickel and Silver Alloy Fret Wire

The fret wire on the Gibson models is a combination nickel and silver alloy (approximately 80 percent nickel and 20 percent silver) specifically designed for long life and superior wear. Gibson’s traditional “medium/jumbo” fret wire is first shaped by hand, then cut to an exact 12-inch radius. After hand pressing it into the fingerboard, a machine press finishes the job to eliminate the gap between the bottom of the fret wire and the fingerboard.

Set-Neck Construction

Like all classic Gibson guitars, the necks on Les Pauls and SGs are distinguished by one of the more traditional features that have always set them apart—a glued neck joint. Gluing the neck to the body of the guitar ensures a “wood-to-wood” contact, no air space in the neck cavity, and maximum contact between the neck and body, allowing the neck and body to function as a single unit. The result? Better tone, better sustain, and no loose or misaligned necks.

Solid Mahogany Body

Probably the most central of all SG features is its solid mahogany body. The mahogany goes through the same rigorous selection process as all of Gibson’s woods, and is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the factories. Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of “equilibrium,” where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, and controls the shrinkage and warping of the woods, in addition to reducing the weight. It also improves the woods’ machinability and finishing properties. Consistent moisture content means that the SG will respond evenly to temperature and humidity changes long after it leaves the factory.

GIBSON’S 490R AND 498T PICKUPS

The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. It was an interpretation of the blues that hadn’t been heard before, and it was much harder, more rocking, and definitely louder than anything else before it. As such, this new genre’s players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup to split coils through a push/pull knob, and prevent the microphonic feedback that occurs when the volume is turned up to maximum levels. Gibson answered this call with the introduction of the revolutionary 490T and 490R pickups (“T” for treble, and “R” for rhythm), which has the traditional characteristics of the original “Patent Applied For” pickups, but with two key modifications. First, a four-conductor wiring scheme allows the 490s to be connected to any push/pull knob, which lets players split the coils and increase versatility. Gibson also introduced wax potting, which does away with any air space inside the pickup—thus lessening the chances of microphonic feedback. The result is a humbucker with the tonal characteristics of an original PAF, with a slight increase in upper mid-range response. The Gibson 498T bridge pickup is the 490’s ideal complement. Taking the 490 one step further, the 498 swaps the Alnico II magnet to an Alnico V, thus making it slightly hotter with emphasis on mid-ranges and highs. The pole pieces on the 498T are also aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.

Tune-O-Matic Bridge

The Tune-o-matic bridge was the brainchild of legendary Gibson president Ted McCarty in 1954. At the time, it was a true revelation in intonation, and set a standard for simplicity and functionality that has never been bettered. This pioneering piece of hardware provides a firm seating for the strings, allowing the player to adjust and fine-tune the intonation and string height in a matter of minutes. It also yields a great union between the strings and body, which results in excellent tone and sustain. It is combined with a separate “stopbar” tailpiece, essentially a modified version of the earlier wraparound bridge. To this day, the Tune-o-matic remains the industry standard. It is the epitome of form and function in electric guitar bridge design, and is one of the most revered and copied pieces of guitar hardware ever developed.

Nitrocellulose Finish

Applying a nitrocellulose finish to any Gibson guitar—including the Gibson SG—is one of the most labor-intensive elements of the guitar-making process. A properly applied nitro finish requires extensive man hours, several evenly applied coats, and an exorbitant amount of drying time. But this fact has never swayed Gibson into changing this time-tested method, employed ever since the first guitar was swathed with lacquer back in 1894. Why? For starters, a nitro finish dries to a much thinner coat than a polyurethane finish, which means there is less interference with the natural vibration of the instrument, allowing for a purer tone. A nitro finish is also a softer finish, which makes it easily repairable. You can touch up a scratch or ding on a nitro finish, but you can’t do the same on a poly finish. In addition, a nitro finish is very porous in nature, and actually gets thinner over time. It does not “seal” wood in an airtight shell—as a poly finish does—and allows the wood to breathe and age properly.

Gallery